Description

The daily cleaner that does more than clean.

Most daily maintenance cleaners just remove surface dirt. Faber Neugel does that and more — its concentrated gel formula is specifically designed for natural stone and absorbent surfaces, and with every clean it deposits a nourishing layer that progressively enhances the material’s tone, builds dirt resistance, and makes the next clean easier. The more you use it, the better your floors look and the easier they are to maintain.

It’s the professional’s daily maintenance choice for stone floors — after deep cleaning with Faber 30 2.0 or Tile Cleaner, Neugel is the product that keeps them looking right in between.

---

Key Benefits

• Neutral gel formula — the gel consistency provides excellent surface contact and thorough coverage, particularly valuable on rough and textured surfaces like terracotta where a thinner liquid runs off before it can act
• Nourishes and enhances tone — builds up a surface-protective layer over time that enhances the natural colour and character of the stone
• Progressive dirt resistance — regular use increases the dirt-repellent performance of the treated surface, reducing the effort needed for future cleaning
• No rinsing required — at correct dilution, the floor needs no rinse and is ready for foot traffic as soon as it dries. Saves time and water
• Extraordinary concentration — 900–1,100 m² coverage per litre makes this one of the most economical daily stone cleaners available
• Safe on treated floors — neutral pH means it won’t strip wax, sealer, or protective treatments from the surface
• Fresh scent — pleasant, light fragrance for enclosed indoor spaces
• Indoor and outdoor use — effective across both environments
• Made in Italy — Faber Chimica Professional Line

---

Neugel vs Faber Soap vs Alga Floor — which do you need?

All three are neutral daily cleaners but they serve different surface types:

---

Suitable Surfaces

Concrete marble agglomerate · Resin marble agglomerate · Slate · Sandstone · Basaltina / Lava stone · Molten basalt · Concrete tiles · Concrete · Terracotta · Granite · Wood · Limestone · Marble · Reconstructed stone (Ecopietra) · Porphyry · Quartzite · Travertine · Tuff

Suitable for indoor and outdoor applications.

---

Dilution Guide

If used at the dilution ratios stated above, no rinsing is required and the floor can be opened to foot traffic as soon as it is dry.

---

How to Apply

1. Remove surface debris using a broom or vacuum cleaner before applying any liquid
2. Dilute Neugel to the appropriate strength for your surface type (see dilution guide above)
3. Apply the diluted solution evenly across the surface using a mop, cloth, single-disc machine, or hard floor cleaner
4. Work the solution into the surface, paying particular attention to textured areas and joints
5. Allow to dry — no rinsing required at the dilution ratios stated
6. Surface is ready for foot traffic as soon as dry

Application equipment can be cleaned with water.

---

Complete the Stone Care System

• Faber 30 2.0 — concentrated alkaline deep cleaner for periodic heavy-duty cleaning before returning to a Neugel maintenance routine
• Faber Tile Cleaner — slightly acidic deep cleaner for removing surface patinas and old maintenance build-up
• Faber Ciao Cal — neutral limescale and watermark cleaner for wet-contact surfaces
• Faber Hidro 150 — stain-proof impregnating sealer for natural stone

---

Technical Specifications

---

Downloads

Neugel Technical Data Sheet