Description
The Faber Warrior is a 2.5 HP (220V/50Hz) 53KG professional single disc machine operating at 155 rpm with a 17-inch (430mm) working head. It is designed for demanding floor maintenance tasks including deep scrubbing, stripping of coatings and contaminants, spray cleaning, crystallisation, and pad polishing on stone, marble, granite, terrazzo, porcelain, ceramic, cotto, and other hard floor surfaces. The Warrior’s 2.5 HP motor gives it significantly more torque than entry-level single disc machines, making it suitable for contractor and industrial use where sustained run times and consistent pressure are required. It operates on a standard 220V/50Hz UK supply. The working head accepts all standard 17″/430mm driveboards, brush heads and pads — including the Crobber cro-connect modular brush system and MENZER floor pad range. Each Warrior is supplied complete with water tank and a Crobber M Medium Scrub Brush. The optional 14kg counterweight is available separately for increased downforce on heavy stripping work. Please allow approximately 21 days for delivery; machines are dispatched direct from Faber Chimica in Italy.
The Faber Warrior — Built for Professionals
The Warrior sits at the top of the Faber single disc machine range. Where the Defender (1.5 HP) handles routine maintenance and lighter restoration tasks, the Warrior’s 2.5 HP motor is built for sustained heavy-duty use — extended scrubbing runs, coating removal, deep restoration work, and regular contractor deployment on large commercial floor areas.
Faber Chimica are an Italian manufacturer with over 35 years of specialisation in professional surface care chemistry and equipment. The Warrior is engineered to the same standards as Faber’s cleaning and sealing product range — built for professionals who need tools that perform consistently job after job, not consumer-grade machines repackaged for trade use.
Technical Specification
| Specification | Detail |
|---|---|
| Motor Power | 2.5 HP |
| Supply | 220V / 50Hz |
| Speed | 155 rpm |
| Working Head Diameter | 17″ / 430mm |
| Water Tank Capacity | 18 litres |
| Machine Weight | 53 kg |
| Extra Weight Option | 14kg counterweight (optional, Warrior only) |
| Manufacturer | Faber Chimica s.r.l., Fabriano, Italy |
What’s Included
The Warrior is supplied complete with the following:
- Water Tank — 18 litre capacity
- Crobber M Medium Scrub Brush — professional wet scrubbing brush for stone, tile, limestone, porcelain, vinyl and mixed hard floors; red outer row wear indicator included as standard
The 14kg extra counterweight is available separately.
Compatible Accessories — Pads & Brushes
The Warrior’s 17″/430mm head is compatible with the full range of accessories we stock:
Crobber Brush Heads & Driveboards — cro-connect system
The Crobber modular system separates the machine-connection driveboard from the consumable brush head — reducing long-term running costs and waste:
- Crobber V-Board (velcro driveboard) — for velour-backed and microfibre pads
- Crobber M Medium Scrub Brush — wet scrubbing of stone, tile, limestone, porcelain, vinyl and mixed hard floors; red outer row wear indicator
- Crobber G Grit Brush K80 — heavy soiling, ingrained grime, old coating removal; maximum aggression
- Crobber G Grit Brush K180 — moderate deposits and controlled abrasive cleaning; balanced aggression
MENZER Floor Pads — 406mm / 17″
MENZER’s professional pad range is manufactured in Germany for consistent performance across the full application spectrum:
- Black pad — coarse stripping and heavy degreasing
- Red pad — medium scrubbing and light stripping
- Green pad — general daily scrubbing
- White pad — spray buffing and light cleaning
- Beige/Tan pad — dry buffing and final polishing
- Melamine pad — water-only deep cleaning; zero chemical residue; ideal pre-seal mechanical clean on stone and tile
Applications
The Warrior is suited to the following floor maintenance and restoration tasks:
- Deep scrubbing — stone, tile, terrazzo, cotto, quarry tile, polished concrete
- Coating and wax stripping — combined with Faber CottoSolv or Faber DEC 21 using Crobber K80 or K180 grit brush or stripping pad
- Spray cleaning and maintenance — ongoing planned maintenance on commercial stone and tile floors
- Crystallisation — marble surface hardening and gloss restoration
- Pad polishing — marble, granite and polished stone finishing
- Surface preparation pre-sealing — mechanical cleaning pass using melamine pad after chemical stripping and rinse
Pairing the Warrior with Faber Chemistry
The Warrior is designed to work alongside Faber’s professional cleaning and preparation chemistry. Recommended pairings for common tasks:
- Heavy soiling and coating removal: Faber CottoSolv (alkaline wax and resin stripper) or Faber DEC 21 (solvent-based stripper) — applied and worked in with Crobber K80 or K180 grit brush
- Alkaline deep clean and mould or organic soiling: Faber 30 — applied with Crobber M Medium Brush
- Pre-seal mechanical pass: Melamine pad, water only — after chemical cleaning and rinsing are complete
- Post-restoration maintenance: Faber Floor Cleaner or Faber Neugel with white or green pad
Choosing Between the Defender and the Warrior
The key difference is motor torque and sustained-use capacity. The Defender (1.5 HP) is well-suited to regular maintenance, smaller floor areas, and lighter restoration work. The Warrior (2.5 HP) is the correct choice for contractors running full-day programmes on larger commercial floors, heavier stripping work, or anywhere consistent machine performance under load is critical. The optional 14kg counterweight further increases downforce on the Warrior for demanding strip-and-clean applications.
Delivery & Lead Time
The Faber Warrior is dispatched direct from Faber Chimica in Italy. Please allow approximately 21 days from order for delivery. Machines are delivered via pallet courier to a ground-floor accessible address. For lead time queries prior to ordering, contact us directly.
Reviews
There are no reviews yet.